Description The Slee SliderSteps for the GX-470 is formed out of 3/16″ steel. The sliders consist of a frame mount flange, three support legs per side and the main SliderStep. The frame flange bolts directly to the frame utilizing existing holes in the frame. It also has three mounting fixtures welded to attach the legs. This ensures a solid mount without any compromise. The slider body is formed out of 7GA ( 3/16″) steel and functions as both a step and a slider. Sliders are now made from High Strength Low Alloy (HSLA) has nearly twice the strength and impact resistance of general purpose mild steel (A1011 and A36). 30-36ksi Yield strength vs 50ksi yield strength minimum. There are two aluminum tread plates attached to the top surface of the slider body. These are only available in black. Tread plates have dimples that form a non-slip surface when wet. The slider body is cut with the same pattern as the tread plates to prevent dirt / ice build-up. The sliders are finished with a textured powder coat finish and supplied with all the necessary hardware for installation. Does not fit 4Runner with v6 engine
